The P6021 and P6022 Current Probes provide versatile AC current measurements. Both probes provide accurate current measurements over a wide range of frequencies. The P6021 and P6022 allow current measurements without breaking the circuit by clipping onto the current carrying conductor. Shielded probe heads are not grounded when the slides are in their open positions, eliminating accidental grounding of the circuit under test.

Key performance specifications

P6021A120 Hz to 60 MHz

10.6 A RMS, 250 A peak, 10 mA sensitivity

P6022935 Hz to 120 MHz

4 A RMS, 100 A peak, 1 mA sensitivity

Key features

For 1 MΩ inputs

Shielded probe head

AC only

Split core construction allows easy circuit connection

1.5 m (5 ft) cable

Applications

Motor drives

Power inverters/converters

Power supplies

Avionics

P6021A

For general purpose applications, the P6021A provides wide-band performance with excellent low-frequency characteristics. Bandwidth is 120 Hz to 60 MHz. The probe range is switchable between 2 mA/mV and 10 mA/mV.

P6022

With a head size of 0.47 in. x 0.25 in. (10 mm x 6 mm, about half the size of the P6021A) and a bandwidth of 935 Hz to 120 MHz, the P6022 is ideal for measuring currents in compact, high-performance circuits. Passive termination output is switchable between 1 mA/mV and 10 mA/mV.

Specifications

All specifications apply to all models unless noted otherwise.

Physical characteristics

Cable length 1.5 m (59 in)P6021A probe head Length 20 cm (7.77 in)Width 16 mm (0.625 in)Height 32 mm (1.25 in)Maximum conductor diameter 5 mm (0.197 in)P6022 probe head Length 152 mm (6.0 in)Width 6.4 mm (0.25 in)Height 12 mm (0.47 in)Maximum conductor diameter 2.8 mm (0.11 in)

EMC environment and safety

Compliance

CAN/CSA-C22.2 No. 61010-1

CAN/CSA-C22.2 No. 61010-2-032

UL 61010-1

UL61010B-2-032

EN 61010-1

EN 61010-2-032